Compare FY-PCM01, FY-TCM01 and FY-GCM01 for CNC plate cutting. Specify plasma for suitable conductive-metal cutting, oxy-fuel for appropriate carbon-steel work, or a confirmed dual-process torch arrangement.
Portable format with configurable cutting area. The supplied sheet gives a 1500 × 3000 mm effective-area reference and also describes custom sizes.
Confirm track layout, support table/foundation, controller and plasma power source. Controller, machine weight and transport dimensions depend on the selected configuration.
Steel plate-welded table format. The supplied sheet lists a basic 1500 × 3000 mm cutting area with sizes according to the application.
Confirm table layout, material supports, water/extraction arrangement, torch package, controller and plasma-source specification.
Steel plate-welded gantry format. The supplied reference configuration lists 2200 × 6500 mm cutting area within a 3000 × 8000 mm machine/rail layout.
Confirm effective area separately from overall layout, plus rails, foundations, lifting access, drive package and plasma/flame torches.
Product photographs show supplied reference configurations. Plasma sources, controller brands, torches and site-built support items are confirmed in the final bill of supply.
Plasma cuts electrically conductive materials. Carbon steel, stainless steel and aluminium require the appropriate source, current, gas/air setup and consumables. Ask for the matched cut chart and sample edge quality.
Do not use a power source’s maximum severance figure as its normal production or piercing capacity.
Oxygen and fuel-gas cutting is principally selected for suitable carbon-steel work. Confirm the fuel, oxygen supply, nozzle, ignition and preheat arrangements.
Conventional oxy-fuel cutting is not the general-purpose process for stainless steel or aluminium. Compare plasma or fiber laser for those jobs.
Technical process reference: Hypertherm plasma versus oxy-fuel. This reference describes processes; it is not certification of a particular FYXFER configuration.
| Model | Format | Documented effective-area reference | Order-specific confirmation |
|---|---|---|---|
| FY-PCM01 | Portable | 1500 × 3000 mm; custom sizes described | Rails, support structure, controller, source and torch package |
| FY-TCM01 | Table | 1500 × 3000 mm basic reference; custom sizes described | Bed, material support, water/extraction arrangement, source and controls |
| FY-GCM01 | Gantry | 2200 × 6500 mm in the supplied reference configuration | Span/travel, foundation, rail installation, loading and torch layout |
Source: the corresponding FY-PCM01, FY-TCM01 and FY-GCM01 model sheets. Specify production thickness, edge-quality requirements and the selected power source when requesting a cutting-performance chart.
Site-built rails, supports, air/gas lines and utility work appear as customer-prepared items in some source configurations. Confirm responsibility for every item rather than assuming a turnkey package.
Send material grade, typical and maximum thickness, plate size, drawings, target output, preferred machine format, facility power and destination. Include whether plasma, oxy-fuel or both processes are required.
Sources: FY-PCM01.pdf, FY-TCM01.doc and FY-GCM01.pdf supplied in the corresponding model folders. Reference dimensions describe the documented configurations; confirm the ordered size and bill of supply. Content reviewed against the supplied documents: 18 September 2026. Ask for the current configuration sheet before ordering.